France ATMI BIP-STOP float level control switch, automatic level control is mainly used in the pump. BIP-STOP type can be connected directly to pump up to 1.5 horsepower. Can also be connected to a higher power pump via a relay. BIP-STOP measuring angles up to + / - 110o, so BIP STOP can effectively protect the pump motor and circuit boards. This feature works best choppy fluid. Advantages:? + /-110o wide-angle measurements to protect the pump motor. ? Easy to use, without any post-maintenance. Applications ::? Can be used to clean (rain, water, etc.), or mildly corrosive liquids (sewage, oil, mud, etc.) using the. ? Can be used to pump water to fill / drain evacuated overflow protection / no liquid protection, high / low level alarms use. ? Technical Data: Measuring direction detection angle running up + / - 110o maximum pressure up to 3.5 bar Liquid Density 0,70 to 1,15 interrupter Power 20 (8) A (20A resistive - 8A inductive???? ?) cable type optional neoprene or HR HY (High Resistance) Product Summary:? We strongly recommend that in order to measure higher accuracy and longer life, with the float switch using an external counterweight accessories and cable clamps. ? BIP STOP float level switch can be used for three kinds of control (1) scheduled to open / fill (2) emptying + Ground (3) special evacuation mode, with multi-connector can be automatically or manually controlled pumps. ? The need for multi-level or multi-control can pump, you can use our AQUA XL or SOBA, TUBA series.