France AT120 float level control switch, automatic level control is mainly used in the pump. AT120 type can be connected directly to pump up to 1.5 horsepower. Can also be connected to a higher power pump via a relay. Measuring angles up to + /-120o, so the AT120 can effectively protect the pump motor and circuit boards. This feature works best choppy fluid. Advantages:? + /-120o wide-angle measurements to protect the pump motor. ? Easy to use, without any post-maintenance. Applications ::? Can be used to clean (rain, water, etc.), or mildly corrosive liquids (sewage, oil, mud, etc.) using the. ? Can be used to pump water to fill / drain evacuated overflow protection / no liquid protection, high / low level alarms use. ? Technical Data: Measuring direction detection angle running up + / - 110o maximum pressure up to 3.5 bar Liquid Density 0,70 to 1,15 interrupter Power 20 (8) A (20A resistive - 8A inductive???? ?) cable type optional neoprene or HR HY (High Resistance Sheets:? We strongly recommend that in order to measure higher accuracy and longer life, with the float switch using an external counterweight accessories and cable clamps to AT 120.? float level switch can be used in 3 posture (1) scheduled to open / fill (2) emptying + Ground (3) special evacuation mode, with multi-connector can be automatically or manually controlled pumps.? for need multi-level or multi-can pump control, you can use our AQUA XL or SOBA, TUBA series.